The world's oceans contain tremendous renewable energy potentials. It is estimated that if 0.2% of the ocean's untapped energy could be harnessed, it could provide power sufficient for the entire world [1]. This thesis provides a comprehensive description of the state-of-the-art of ocean energy extraction technologies and lessons learned from...
Advancements in power electronics to higher power levels and faster switching times allow new machine and systems designs, but also create higher stresses on electric machinery insulation. High performance, pulse-width modulated (PWM) inverters are now available for medium voltage drive systems, and are being considered by the U.S. Navy as...
The aim of this dissertation is to develop non-traditional approaches to alternating-current thin-film electroluminescent (ACTFEL) device fabrication. ACTFEL technology suffers from a lack of adequately bright and efficient primary-color phosphors and cannot presently compete in the low-cost display market. Therefore the research presented in this dissertation focuses on an exploration...
This thesis presents an automated methodology to calibrate the substrate profile for accurate prediction of substrate parasitics using Green's function based extractors. The technique requires fabrication of only a few test structures and results in an accurate three layered approximation of a heavily doped epitaxial silicon substrate. The obtained substrate...
The focus of this thesis involves development of highly transparent, n-channel, accumulation- mode thin-film transistors employing a zinc tin oxide (ZTO) channel layer. ZTO-based transparent thin-film transistors (TTFTs) show improved device performance compared to ZnO-based TTFTs. An estimated peak effective mobility for these devices as high as ~100 cm² V⁻¹sec⁻¹...
The objective of this thesis is to contribute to the development of p-type materials for transparent electronics applications. Thin films of ®-BaCu2S2, a p-type semi-transparent semiconductor, are fabricated and characterized. ®-BaCu2S2 has a transmittance of 60% to 80 % in the visible portion of the electromagnetic spectrum. The mobility, conductivity,...
The objective of this dissertation is to introduce low-cost processing methods for the fabrication of ZnO transparent thin-film transistors (TTFTs). A novel method for depositing ZnO body layers via spin-coating of a zinc nitrate-based spin solution is presented. The processing conditions of spin-coated ZnO are optimized to produce continuous and...
Strategies for simulation and measurement of substrate noise have been analyzed using various digital and analog circuits fabricated in the TSMC 0.35um heavily doped CMOS process. The measurements validate a substrate noise coupling macromodel that has been used to obtain the simulation results. The simulations and measurements also substantiate the...
Phase-locked loop (PLL) frequency synthesizers lie at the heart of most radio transceivers. An important objective of the electronics and communications industry is to design high-speed building blocks which dissipate the lowest possible power, and to ac- complish this with the cheapest technology. The dual-modulus prescaler is one of the...
With the development of high performance power electronic and semiconductor technologies, Adjustable Speed Drive (ASD) systems are increasingly applied in residential, commercial and industrial applications. Due to the advantages at higher power ratings, the three-level Neutral-Point-Clamped (NPC) Voltage Source Inverter (VSI) is being employed in industrial and traction applications, static...
Pipelined analog to digital converters (ADCs) are very important building blocks in many electronic systems such as high quality video systems, high performance digital communication systems and high speed data acquisition systems. The rapid development of these applications is driving the design of pipeline ADCs towards higher speed, higher dynamic...
A comparison and analysis of jitter for five different architectures of ring oscillators using a novel simulation technique developed by Professor Forbes' group is presented. Ring oscillators have become an essential building block in many digital and synchronous communications system due to their integrated nature and are widely used in...
A tuning technique which tunes the continuous time filter very accurately is proposed in this thesis. This technique overcomes the problem of master slave mismatch, thus tuning the filter accurately. The mismatch minimization is done on power up on foreground while the background tuning is always operational. Once the mismatch...
Advanced low power devices promote the development of micro power generators (MPGs) to replace the batteries to power them. Due to the trend in decreasing integrated circuit (IC) supply voltages, power supply designers are facing more and more serious challenges. The objective of this research is to design a power...
This thesis presents the contributions to substrate noise due to supply coupling and the effect of pin parasitics on the substrate noise generated by digital circuits. Various sources of substrate noise and their effect on analog circuits sharing the same substrate are discussed. A simulation approach to isolate the various...
Many new applications of energy system devices have been developed to save energy, improve the controllability and stability of industrial processes, and reduce the weight, volume and cost of consumer devices. Due to the novelty of these devices, traditional empirical methods and lumped-parameter circuit theory methods are not sufficient for...
The electrical behavior of on-chip interconnects has become a dominant factor in silicon-based high speed, RF, and mixed-signal integrated circuits. In particular, the frequency-dependent loss mechanisms in heavily-doped silicon substrates can have a large influence on the transmission characteristics of on-chip interconnects. To optimize the performance of the integrated circuit,...
This thesis proposes a novel fully digital technique for the estimation and correction of the DAC error in multi-bit delta sigma ADCs. The structure of the DAC error is indicated through a simple model for unit-element based DACs. The impact of the DAC error on the performance of ADC is...
A new comprehensive wide-band compact modeling methodology for single-ended spiral inductors and differential spiral inductors is presented. The new modeling methodology creates an equivalent circuit model consisting of frequency-independent circuit elements for use in circuit simulators. A fast automated extraction procedure is developed for determining the circuit element values from...
In the first part of this dissertation, low frequency l/f or flicker noise in the frequency range of Hz to kHz has been identified and demonstrated to be described by temperature fluctuations in heat conduction in bipolar transistors operated at higher power densities. This noise phenomenon is not described by...
The objective of this work is to explore the feasibility of replacing conventional op-amps with inverters in switched-capacitor (SC) circuits. In order to verify the idea, a low-pass filter (LPF) and a second-order delta-sigma (∆Σ) analog-todigital converter (ADC) are designed in the 0.5-m CMOS technology. The low-pass filter structure is...
Hardware cryptography offers a reliable way to provide security for data that is sent over networks. Security processors have taken the stage in the movement for secure computing. Some of the more prominent security processors belong to the S1 family created by Motorola. The primary goal of this thesis is...
A novel method for modeling bends in coplanar waveguides (CPWs) is described. The CPW can be viewed as a pair of parallel coupled quasi-slot lines. Bends in the CPW are modeled as a non-uniform coupled line system in terms of their even- and odd- mode characteristics. This modeling approach is...
Embedded passives in multi-layer media have gained importance for offering an attractive solution to the implementation of off-chip passive components in RF and mixed signal circuits, especially for wireless applications. Among the passive devices, power dividers and combiners are extensively used for a host of applications including balanced mixers, phase...
This thesis presents an adaptive modulation scheme using a Walsh-code modulator. The Walsh-code modulator consists of a dynamic demultiplexer and predetermined sets of orthogonal Walsh-Hadamard codes. The demultiplexer can demultiplex the input bit stream into a maximum of thirty-two sub-streams. The Walsh- Hadamard codes are used to spread the spectrum...
In cellular telephones, RF power amplifiers consume a significant part of the total phone current. Reducing the average PA current will extend battery life. In GSM systems the handset is commanded by the base station to transmit at power levels lower than full power much of the time. A Doherty...
The long-term goal of the research project initiated with this thesis is the development of lead-free, fully-transparent ferroelectric devices, such as ferroelectric capacitors or ferroelectric-gate field-effect transistors. Ferroelectric materials exhibit spontaneous polarization with the application of an external electric field, which is persistent upon removal of the applied field, and...
Switch-mode power supplies (SMPS's) not only convert energy, they also consume it. Typical operational efficiencies are approximately 25 to 60% for linear power supplies, and approximately 50-90% for switching power supplies. This means that products whose end-use electronics are dc, such as televisions and DVD players, could consume 50% less...
A main arithmetic operation for cryptographic systems is modular exponenti- ation. Exponentiation is computed by a long sequence of modular multiplications. Modular multiplication can be implemented in a general-purpose processor or a dedicated hardware, but dedicated hardware tends to be faster than a processor. Modular multiplication is a time-consuming operation,...
A novel switched-R-MOSFET-C input branch is proposed for low-voltage and high-linearity applications. The tunability is achieved by varying the clock duty cycle using an automatic tuning circuit. This tuning method does not involve a change in gate voltage, and is therefore particularly suitable for low-voltage applications. The advantages of the...
In this thesis, a novel Direct-Charge-Transfer (DCT) integrator structure is proposed, which can settle much faster than regular switch-capacitor integrators. A new Spread-Spectrum Dynamic Element Matching (SS-DEM) algorithm is also introduced, which can effectively spread or shape the nonlinearity error of multi-bit DAC in the feedback path, thus improve the...
This thesis examines substrate noise coupling for NMOS transistors in heavily doped substrates. The study begins with the analysis of an NMOS transistor switching noise in a digital inverter at the device level. A resistive substrate network for the NMOS transistor is proposed and verified. Coupling between N+- P+ contacts...
There has been tremendous technological advancement in the area of high-speed indoor wireless local area networks (WLAN's) in recent years. All the existing tech- nologies such as IEEE 802.11a,b are bandwidth limited and high powered systems. The challenge any wireless technology faces is to minimize both the power consumption and...
The Advanced Encryption Standard (AES) is the new standard for cryptography and has gained wide support as a means to secure digital data. Hence, it is beneficial to develop an implementation of AES that has a high throughput. SIMD technology is very effective in increasing the performance of some cryptographic...
This paper discusses two main trends in the development of virtual
machine systems: full system virtualization, where an entire hardware
architecture is replicated virtually, and paravirtualization, where an
operating system is modified so that it can be run concurrently with
other operating systems that have also been designed for paravirtualization.
Information security is an important concern in today’s communication and business world. To achieve these security functions, cryptography is utilized. RSA and the Diffie Hellman key exchange are some examples of cryptography algorithms that use modular multiplication to compute modular exponentiations. Modular multiplication requires division operations which becomes very time...
fIndoor wireless local area networks (LAN's) and personal area networks (PAN’s) have evolved very rapidly in the recent past. The indoor wireless LAN's are mainly dominated by narrow-band technologies like the IEEE 802.11a,b which are short range and provide data rates of 1 Mbps to 54 Mbps. The Bluetooth has...
The AE32000 processor core, developed by Advanced Digital Chips Inc., Korea, is used primarily in the embedded processing environment. The AE32000 simulator models this embedded processor core having high code density. An enhanced simulator was developed to study the performance of the present Instruction Set Architecture after comparison with the...
AE32000 microprocessor was developed mainly to address the need for the reduction in the amount of memory accesses in embedded applications. One of the primary goals of a computer architect is the design and construction of machines, that support the efficient execution of the programs that will run on them....
This thesis investigates Dynamic Voltage Scaling (DVS) techniques to lower power consumption in video decoding. A DVS scheme called the Frame-data Computation Aware (FDCA) method has been presented. This method is adaptable not only to stored video applications but also to real-time video scenarios. Unlike DVS schemes for video decoding...
This thesis work evaluates the need for a re-configurable cross compiler for the X32V processor architecture and discusses the process of developing a cross compiler for X32V. X32V is a new processor intended at the embedded applications domain whose instruction set is designed based on the widely used MIPS processor....
The purpose of this thesis is to explore the design of a multimedia extension Instruction Set Architecture (ISA) for a reconfigurable processor. An Extendable Multimedia Module (EM3) was designed as an optional module for X32V. X32V is a prototype configurable processor simulator developed at Oregon State University by John Mark...
With the current security climate throughout the Internet, a large emphasis is being placed on protecting software systems from attack by a malicious entity. Most successful attacks against software are the result of lazy or misinformed developers and are easily prevented given the correct preparation and instruction. This document provides...
The SIMD (single-instruction, multiple-data) architecture is implemented in many popular general-purpose processor families, including Intel Pentium. In this paper, we examine if any performance gains can be obtained in the implementation of the Secure Hash Algorithms (SHA-1, SHA-256, SHA-384, and SHA-512) and present the details of our optimization methods and...
A new coupled circuit and electrostatic/mechanical simulator (COSMO) for the design of RF MEMS VCOs is presented in this thesis. The numerical solution of device level equations is used to accurately compute the capacitance of a MEMS capacitor. This coupled with a circuit simulator facilitates the simulation of circuits incorporating...
On-line arithmetic modules were proposed as a way to explore parallelism in arithmetic operations at digit level. Using always serial operators that receive inputs and compute the outputs from most-significant to least-significant digits, online arithmetic makes it possible to overlap all arithmetic operations and have a pipelined structure. On-line division...
The focus of this work is on the steady-state analysis of RE circuits using a coupled device and circuit simulator. Efficient coupling algorithms for both the time-domain shooting method and the frequency-domain harmonic balance method have been developed. A modified Newton shooting method considerably improves the efficiency and reliability of...
Systems biology is becoming increasingly important for the study of living organisms. It focuses on the mathematical understanding of biological systems. Cells, the basic units of all living creatures, are biological systems of major interest. Considerable work is being done towards modeling cells as mathematical systems. At the same time,...
This thesis proposes a novel technique for the design of pipelined and cyclic ADCs utilizing generalized radix gain stages. Several models have been proposed for the optimization of high performance pipelined ADCs by various researchers. This work builds upon them, using a simple but accurate model to estimate the optimal...
Three types of low noise amplifiers operating at 2.4GHz were designed. They are the commonly used single-ended and differential amplifiers as well as a new quasi-differential amplifier. The substrate noise injected into these amplifiers is examined for both heavily and lightly doped CMOS substrates. For the single-ended amplifier the noise...
Mobile and telecommunication industry has experienced tremendous growth in the recent past. Miniaturization and increased functionality have become necessary for all passive components in the system. Bandpass filters are critical passive components in any communication system and the existing designs in the crucial 1-10 GHz bandwidth suffer many drawbacks. For...
Hybrid electric vehicles (HEV’s) are a very important part of today’s transportation system as they are bridging the gap between fully electric vehicles and conventional internal combustion vehicles (ICV’s). They have much higher efficiencies and lower emissions than ICV’s, while still having the ability to travel long range and refuel...
A significantly untapped renewable energy source exists in the world's oceans. It is estimated that if 0.2% of the ocean's untapped energy could be harnessed, it could provide power sufficient for the entire world. Ocean energy extraction is an old concept, and it is currently seeing the benefit of advancing...
Networks of on-line modules for Digital Signal Processing (DSP) applications have been designed and analyzed in many papers. Various arguments have been made for on-line arithmetic over other bit-serial and parallel approaches. However, the majority, if not all of the on-line network implementations presented throughout the literature do not take...
Rapid advances in wireless networking have led to more mobile phones, PDAs, and other digital mobile devices becoming ubiquitously connected to the Internet. As the demand of delay sensitive real-time applications for these portable devices increases, providing seamless connectivity to wireless networks becomes a critical issue. For this reason, a...
This dissertation investigates the use of a hardware mechanism called Eager Data Transfer (EDT) for achieving the reduction of communication latency for user-level network protocol. To reach the goal, the dissertation addresses the following research issues. First, the development of a communication system performance evaluation tool called Linux/SimOS is presented....
An analysis of substrate noise coupling in mixed-signal circuits has been performed in the TSMC 0.25 [mu]m lightly doped and heavily doped CMOS processes. Methods to minimize noise coupling in both the chip design and board design phases are presented along with techniques for accurate circuit simulation of noise coupling....
Embedded processors are utilized in many applications with considerable time spent developing and maintaining functionality and performance. Performance being a key factor in adding features such as video and audio to a product. Configurable processors, such as X32V, allow the addition of functionality and performance without large increases in design...
A new method is presented to compress switching information in large digital circuits. This is combined with an efficient approach of generating the noise signatures of cells in a digital library that results in an accurate and efficient approach for estimating the noise generated in digital circuits. This method provides...
In modern telecommunication applications, the need for high-reliability and high data rate is important because of factors such as a higher demand in multimedia capability of mobile devices and the exponentially increasing number of subscribers. Wireless communications in today’s technology have many limitations due to channel imperfections, which result in...
High data rate transmission has become an important challenge in today digital communication systems. One of the most difficult problems faced by engineers is to transmit data at sufficiently high rates through fading channels. This is the main motivation for the research presented herein. In this thesis, we investigate a...
Multi-stage delta-sigma (ΔΣ) architectures, commonly known as MASH, are the preferred choice for analog-to-digital converters (ADCs) used in broadband communication applications, where high-resolution (above 14 bits) and high-bandwidth (several MHz) performances are required. Current state-of-the-art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However,...
The detection of biological and chemical toxins has become one of the main concerns in environmental and military fields. In this framework, the department of Microbiology and Biochemistry at Oregon State University has discovered that fish living cells are promising indicators of the presence of a wide range of toxins....
The desire to apply short-range wireless communication systems to telemetry sensor networks in a metal-enclosed chamber has prompted this study. This thesis will discuss the design of an infrared (IR) communication system for a wireless low-power, low-data- rate sensor network in a metal enclosure. This design requires an in-depth understanding...
Analysis of substrate noise coupling has been performed for a 0.18¹m lightly doped silicon germanium BiCMOS process. Techniques to minimize noise coupling in the chip and board design are presented, as well as methods for accurate modeling for substrate noise coupling simulations. Measurements from a test chip were taken to...
Recent trends in CMOS technology and scaling of devices clearly indicate that leakage power in digital circuits would be crucial and largely depend on the sub-threshold current.
Minimizing leakage is gaining increasing importance along with other critical design aspects primarily due to the growing demand for portable battery-operated electronic devices...
Memory hierarchy design is becoming more important as the speed gap be- tween processor and memory continues to grow. Investigations of memory perfor- mance have typically been conducted using trace-driven emulation, which could take tremendous resources (e.g. long emulation time, large storage requirements for traces, and high overall cost). Recent...
In April of 1997 it was pointed out at an NSF Engineering Education Innovators conference that “… education appears to ignore the need for connections and for integration – which should be at the core of an engineering education.” In order to solve this problem a group named ‘TekBotsTM’ was...
This research focused on the use of classical and modern two-dimensional spectral estimation techniques for enhancing inverse synthetic aperture radar (ISAR) imagery. 2-D Classical spectral estimation methods and 2-D modern parametric and non-parametric spectral estimation methods are applied to simulated and real data sets in order to achieve both range...
The spread of the internet and communications techniques increases the necessity
for security in applications that involves sharing or exchange of secret or private infor-
mation. Public-key cryptography is widely used in establishing secure communication
channels between the users on the Internet, for E-commerce transactions, and in net-
work security...
This paper proposes a novel means of using analog correlators to improve upon existing Ultra-Wideband receiver architectures. Current architectures aim for an all-digital design for the sake of ease of implementation and conceptual simplicity. This causes some notable design challenges including an ultra-high sampling rate, and difficulty capturing multipath energy....
Electron and neutron irradiation effects in InGaP/GaAs single heterojunction bipolar transistors are investigated in this thesis. Devices with different emitter sizes and grown by two different growth techniques were examined. Based on the physics of heterojunction bipolar transistors and concepts of radiation damage mechanisms, the irradiation effects were analyzed. The...
Induction motors are considered to be the work horse in all types of today's industries. In all mechanical applications, using an induction motor is considered to be the preferable, if not the optimum selection. Their failures, on the other hand, cause an interruption equal to their volume of dependency in...
The asymmetric nature of bit errors in several practical applications provides grounds for efficient error control techniques. The Z-channel model and special classes of codes like asymmetric error detection codes and t-asymmetric error correcting/d-asymmetric error detecting codes can be successfully used in ARQ protocols for feedback error control enhancement. This...
Radio frequency (RF) power amplifiers (PA) are the most power consuming components of a mobile communications unit. They are used to convert the DC power from the battery into RF power delivered to the antenna. In a cell phone it becomes very important to use highly efficient power amplifiers, such...
Pipeline analog-to-digital converters (ADCs) have long been used in high-speed systems for power-efficient data conversion. Broadband communication and video processing systems are placing high demands on converter accuracy and speed (above 14 bits and in the multiple-MHz range). The increasing converter requirements coupled with lower supply voltages in modern processes...
Various methods and techniques have been introduced and applied to advance the state of the art of mobile wireless communications technology. For example, some techniques are applied to overcome the problem of multipath caused by the mobile environment. Multipath produces replicas of the wanted signal which arrive at the receiver...
The focus of this thesis involves developing general fabrication processes relevant to the manufacture of two new devices for the Microscale technology Energy and Chemical Systems (MECS) program at Oregon State University. The two MECS devices developed, capture dots and transparent thin-film heaters (TTFHs), require unique process development for successful...
Preventative motor fault detection is of prime importance for modern plant management. During research into rotor faults, performed at the Motor Systems Resource Facility (MSRF), an optimized rotor fault detection and classification method was proposed. In critical process applications, the suggested method would provide the foundation for continually monitoring a...
A constant push from society for more information with richer content simultaneously available at the consumers fingertips have pushed the speeds of electronics to extremes. Bus lines on circuit boards responsible for data communication are being pushed to their limit to meet these demands. As data busses are pushed to...
Recently, the demand for higher data rates of transmission has increased in
many wireless communication applications. Using multi-transmit and multi-receive
antennas has been shown to be a solution, since it can increase the channel capacity to
accommodate higher transmission rates. Among the popular techniques developed to
exploit the use of...
Modern applications in wireless communications systems demand the capability of high transmission rate. Engineers have to find optimum solutions to transmit the signal over fading environments. In this study, we propose the combination of space-time diversity techniques and optimum QAM constellation design, in order to further improve performance. Specifically, we...
In this thesis, novel solutions are proposed for key management issues in mobile ad hoc networks. Presented Hierarchical Binary Tree (HBT) based model is distributed, self-organizing, scalable and does not employ online key distribution authority or group manager. Two different group authentication and group key establishment protocols are proposed for...
With an increasing number of wireless applications at microwave frequencies, the frequency spectrum is becoming quite crowded. Due to this congestion, the current state of technology is leading towards upper microwave and millimeter wave spectra as they also offer other distinct advantages such as larger bandwidth and smaller component footprint....
Symmetric key block ciphers, such as AES, are well known and frequently used. There are five confidentiality modes of operation that are currently recommended for use with a symmetric key block cipher algorithm: Electronic Codebook (ECB), Cipher Block Chaining (CBC), Cipher Feedback (CFB), Output Feedback (OFB), and Counter (CTR). This...
Advanced Encryption Standard (AES) is one of the secret key algorithms used in Cryptography. It is applied in a variety of applications including smart cards, internet web servers, automated teller machines (ATMs), etc. Both hardware and software implementations are taken into consideration while addressing AES algorithms. In addition to reaching...
In many areas of engineering and applied mathematics, spectral methods provide very powerful tools for solving and analyzing problems. For instance, large to extremely large sizes of numbers can efficiently be multiplied by using discrete Fourier transform and convolution property. Such computations are needed when computing π to millions of...
Industry today is pushing personal portable handheld communication de- vices, from cellular telephones to personal navigation systems, and society is embracing the push. The goal is to make compact multi-functional handheld products that can transfer information to those around us through high bandwidth mobile communications. These modules rely heavily on...
New video-conference devices based on omnidirectional multi-camera systems have been emerging in the last few years. These devices require innovative and automated video quality assessment in the earlier stages of their design in order to guarantee competitive product development and quality monitoring. Current quality assessment techniques are not adequate since...
A class of high-performance thin-film transistor (TFT) channel materials has emerged
involving oxides composed of heavy-metal cations (HMCs) with (n-1)d¹⁰ns⁰ (n≥4)
electronic configurations. This thesis is devoted to the pursuit of three topics involving
the development of these materials for TFT applications: modeling TFT currentvoltage
characteristics, an exploratory method for...
Preventative methods for software reverse engineering have been given greater attention in recent times due to the increase in computational resources and tools available to the public. The inherent security provided by encoding source into machine code (executable form) can no longer be assumed, given the availability of effective automated...
Modular arithmetic is a basic operation for many cryptography applications such as public key cryptography, key exchange algorithms, digital signatures, and elliptic curve cryptography. Therefore, fast and efficient hardware design of modular division and multiplication is proposed for implementation of cryptography system with intent to achieve information security. The hardware...
The focus of this work is on developing algorithms for frequency domain steady-state analysis of oscillators. Convergence problems associated with the frequency domain harmonic balance simulation of oscillators have been examined. Globally convergent homotopy methods have been combined with the harmonic balance method for robust high-Q oscillator simulation. Various homotopy...
AES (Advanced Encryption Standard), also known as Rijndael, is a symmetric key block cipher adopted as an encryption standard by the US government and used extensively in cryptographic applications worldwide. ARM is the most popular processor core used in embedded applications. This thesis surveys the available public implementations of AES...
Time of Arrival (TOA) is a popular technique used for geolocation. This thesis evaluates the use of TOA techniques indoors. The accuracy of measuring distances using TOA is dependent on the bandwidth of the system and the multipath conditions between the receiver and transmitter. System bandwidth has a significant effect...
As more advanced hybrid electric vehicles begin emerging onto the commercial market, design algorithms for their control become increasingly more complicated. One major hurdle for designers is the mitigation and control of the created high frequency harmonics caused from switching the dc voltage into an ac voltage by use of...
Passive components, including spiral inductors and transformers, fabricated on silicon-based substrates are placing an increasing demand on radio-frequency integrated circuit (RFIC) design. Performance of the RFIC suffers from several non-ideal effects that must be taken into account in order to create a successful design. In particular, monolithic transformers can be...
Authenticated-Encryption modes of operation have recently received great atten- tion amongst researchers. Such modes of operation provide both privacy and authentic- ity. A proposed mode in this category is the Offset Codebook mode (OCB) by Rogaway et al. This mode shows great substantial advantages over conventional modes. In the past...
The long-term goal of this research project is the development of solution-based inorganic dielectric and semiconductor materials for inkjet printed electronics. The main focus of this thesis involves testing of the materials and devices under development. A new solution-based inorganic dielectric material (HfOSO₄), given the name hafsox, is developed and...
The primary focus of this thesis involves modeling and development of p-type thin-film transistors (p-TFTs), moving towards the realization of a filly transparent thin-film transistor (TTFT). The modeling portion of this thesis emphasizes the development of physics-based TFT models, specifically focusing on the elucidation of non-ideal current-voltage characteristic behavior. A...