At frequencies exceeding 1-2 GHz, the substrate network models used in substrate coupling simulation must account for the reactive nature of the substrate. Unlike at low frequencies, where the purely resistive substrate models can be validated through DC resistance measurements, these high-frequency models, comprising reactive components, must be validated through...
The detection of motor faults at their incipient stage is of prime importance to any industrial plant. The introduction of adjustable speed drives has improved the control and the efficiency of induction motors, however, this has changed the nature of motor faults and how they can be detected.
Current signature...
A digital phase locked loop (DPLL) and a statistical time-to-digital converter (STDC) were previously fabricated in a 0.35µm, 3.3V SOI CMOS process. This work summarizes these designs and characterizes the measured performance. Simulations supplement the measurements where applicable.
The DPLL was found to reach a locked state under a limited...
A new approach to oversampled delta-sigma A/D converters ( AZ modulators ) is introduced, where a differential pseudo-Npath filter stage is used as a basic cell. In this band-pass application, the z to -zN transformation is employed to realize a RAM-type pseudo-2-path lossless integrator. The bandpass second-order and 4th-order delta-sigma...
Systems biology is becoming increasingly important for the study of living organisms. It focuses on the mathematical understanding of biological systems. Cells, the basic units of all living creatures, are biological systems of major interest. Considerable work is being done towards modeling cells as mathematical systems. At the same time,...
The problem of locating a signal source, or an emitter, has many civilian and military applications, such as communication regulations enforcement, military reconnaissance, and search-and-rescue operations. Many of the most widely used emitter location methods rely on the accurate and robust estimation of the differential time delay,
or time-difference-of-arrival (TDOA),...
FISHNET (Facilities Integrated in a Shared Habitat) is a communication subnet architecture utilizing a hybrid application of point-topoint and broadcast communications to achieve a high degree of network performance. This objective is achieved through utilizing a dual bus structure: a data bus and a control bus. The data bus consists...
This thesis presents a design-oriented model for lightly doped CMOS substrates. The model predicts the substrate noise coupling between noisy digital and sensitive analog blocks in the early stages of the design. The model scales with the size and separation of these blocks and it is validated with device simulations...
A computationally efficient and accurate substrate noise coupling model for multiple contacts in heavily doped CMOS processes is presented and validated with simulations and experimental data. The model is based on Z parameters that are scalable with contact separation and size. This results in fast extraction of substrate resistances for...
Low noise oscillators are universally needed in digital systems for clock generation and synchronization, and in radio-frequency communication front-ends for frequency up- and down-conversion. Noise in oscillators results in timing jitter, and limits the clock frequency of digital systems. In radio-frequency communication systems, phase noise in oscillators lowers the signal-to-noise...
Estimating the operating efficiency of an induction machine is of prime importance for modern plant management. An extensive testing program of present efficiency estimation techniques was performed at the Motor Systems Resource Facility (MSRF), during which serious shortcomings of the existing techniques were identified. The objective of the work of...
For many years, the von Neumann bottleneck has imposed speed limits on the execution of a program. Because of their sequential nature, von Neumann computers can only execute a single instruction at a time. Instructions that are side-effect free and can be executed in parallel must wait. In an effort...
The application of systems and control theory to membrane physiology is presented here. Modeling efforts have focused on describing those physiologically realistic mechanisms which govern the regulation of membrane permeability in nerve. The motivation behind identifying such mechanisms lies in understanding the morphology of neural activity on a meaningful and...
Alternating-current thin-film electroluminescent (ACTFEL) devices are metal-insulator-semiconductorinsulator-
metal (MISIM) structures which emit light under high field, pulsed excitation. One aspect of ACTFEL operation that is not well understood is the aging of such devices with operating time. One of the primary goals of
this thesis is to characterize the kinetics...
Development of a suitable thin-film technology has stimulated research in, and production of, a.c. thin film electroluminescent (ACTFEL) devices. The aim of this thesis is to provide a better understanding of the physical processes associated with the device characteristics
of such ACTFEL devices. The unique phenomena exhibited by these devices...
With the development of high performance power electronic and semiconductor technologies, Adjustable Speed Drive (ASD) systems are increasingly applied in residential, commercial and industrial applications. Due to the advantages at higher power ratings, the three-level Neutral-Point-Clamped (NPC) Voltage Source Inverter (VSI) is being employed in industrial and traction applications, static...
Memory hierarchy design is becoming more important as the speed gap be- tween processor and memory continues to grow. Investigations of memory perfor- mance have typically been conducted using trace-driven emulation, which could take tremendous resources (e.g. long emulation time, large storage requirements for traces, and high overall cost). Recent...
The spread of the internet and communications techniques increases the necessity
for security in applications that involves sharing or exchange of secret or private infor-
mation. Public-key cryptography is widely used in establishing secure communication
channels between the users on the Internet, for E-commerce transactions, and in net-
work security...
AE32000 microprocessor was developed mainly to address the need for the reduction in the amount of memory accesses in embedded applications. One of the primary goals of a computer architect is the design and construction of machines, that support the efficient execution of the programs that will run on them....
Pipeline analog-to-digital converters (ADCs) have long been used in high-speed systems for power-efficient data conversion. Broadband communication and video processing systems are placing high demands on converter accuracy and speed (above 14 bits and in the multiple-MHz range). The increasing converter requirements coupled with lower supply voltages in modern processes...
This work focusses on the modeling and the development of efficient coupled simulation techniques for MEMS based RF oscillators. High-level models for MEMS based varactors have been discussed and their accuracy issues are identified, based on comparisons with numerical simulations. A faster simulation approach based on the time-domain shooting method...
A comparison and analysis of jitter for five different architectures of ring oscillators using a novel simulation technique developed by Professor Forbes' group is presented. Ring oscillators have become an essential building block in many digital and synchronous communications system due to their integrated nature and are widely used in...
Preventative motor fault detection is of prime importance for modern plant management. During research into rotor faults, performed at the Motor Systems Resource Facility (MSRF), an optimized rotor fault detection and classification method was proposed. In critical process applications, the suggested method would provide the foundation for continually monitoring a...
With edge rates of high speed digital devices pushing into the sub-nano second
range, interconnections with the associated packages play a major role in determining
the speed, size and performance of digital circuits and systems. The purpose of this
study is to develop experimental techniques based on time domain peeling...
A general discrete-time, adaptive, multidimensional framework is introduced
for estimating the motion of one or several object features from their successive
non-linear projections on an image plane. The motion model consists of
a set of linear difference equations with parameters estimated recursively from
a non-linear observation equation. The model dimensionality...
The ability to integrate designs from board level, multi-chip modules to single process solutions is highly attractive in today's PC multimedia industry. Saving board area and chip count will decrease the production cost of personal computing hardware and increase profitability. The ability to integrate analog circuit capability and it's reference...
This thesis discusses an approach whereby
Microsoft's MS OS/2 is provided with a means of running
the Department of Defense's Transmission Control
Protocol/Internet Protocol (TCP/IP).
This is done by developing a Packet Protocol Device
Driver. This device driver complies with the Packet
Driver Specification from FTP Software Inc. and with...
With the current security climate throughout the Internet, a large emphasis is being placed on protecting software systems from attack by a malicious entity. Most successful attacks against software are the result of lazy or misinformed developers and are easily prevented given the correct preparation and instruction. This document provides...
A novel switched-R-MOSFET-C input branch is proposed for low-voltage and high-linearity applications. The tunability is achieved by varying the clock duty cycle using an automatic tuning circuit. This tuning method does not involve a change in gate voltage, and is therefore particularly suitable for low-voltage applications. The advantages of the...
Mobile and telecommunication industry has experienced tremendous growth in the recent past. Miniaturization and increased functionality have become necessary for all passive components in the system. Bandpass filters are critical passive components in any communication system and the existing designs in the crucial 1-10 GHz bandwidth suffer many drawbacks. For...
On-line arithmetic modules were proposed as a way to explore parallelism in arithmetic operations at digit level. Using always serial operators that receive inputs and compute the outputs from most-significant to least-significant digits, online arithmetic makes it possible to overlap all arithmetic operations and have a pipelined structure. On-line division...
This thesis introduces a Brushless Doubly-Fed Machine (BDFM), stand-alone
generator system. Development of a BDFM current-forced model, along with the
analysis of air gap power distribution between the two stator windings and the rotor
circuit, pave the way for the characterization and analysis of stand-alone generator
systems.
The main disadvantage...
Generation of electricity from the wind is becoming increasing popular as an
environmentally responsible resource. Current methods for generating electricity from
the wind involve the use of fixed-speed generators. However, the use of variable-speed
generators increases the amount of energy that can be extracted from the wind.
Most variable-speed technologies...
Use of conventional induction machines (IM) in adjustable
speed drives (ASD) has increased in recent years. Electronic
power processing has facilitated this increased use. The IM
is an inexpensive and robust machine, but when used as part of
an ASD, the cost of the system increases due to the inclusion...
The Brushless Doubly Fed Machine (BDFM) is receiving attention as a candidate for use in adjustable speed drives (ASDs) and variable speed generators (VSGs). With a large percentage of a drive or generator system's cost due to power electronics content, considerable research has been conducted to find drives in which...
This thesis presents the development of a supervisory controller for a pre-commercial
Brushless Doubly-Fed Machine (BDFM) drive system. In addition,
characterizations of new diecast rotors for the BDFM are presented. Using the
characterization results from the new rotors, a control scheme was developed to allow a
BDFM to be packaged...
This dissertation investigates the use of a hardware mechanism called Eager Data Transfer (EDT) for achieving the reduction of communication latency for user-level network protocol. To reach the goal, the dissertation addresses the following research issues. First, the development of a communication system performance evaluation tool called Linux/SimOS is presented....
The design of two 2.4GHz CMOS LC balanced oscillators in the 0.25μm National BiCMOS process for Bluetooth specifications is presented. These oscillators achieve low phase noise with low power consumption. At a frequency offset of 500KHz from the 2.11GHz carrier, the measured phase noise is -101.9dBc/Hz for the NMOS oscillator...
Voltage converters or charge pumps find their use in many circuits. They are extensively used in hand held devices as cell phones, pagers, PDA's and laptops. Some of the important issues relating to design of voltage regulators for handheld devices are size, efficiency and noise. Another important factor to be...
The Elliptic Curve Digital Signature Algorithm (ECDSA) is one of the most popular algorithms to digitally sign streams or blocks of data. In this thesis we concentrate on porting and optimizing the ECDSA on the ARM7 processor for a particular NIST curve over GF(2[superscript m]). The selected curve is a...
High bandwidth of networks demands high performance communication processors that integrate application processing, network processing, and system support functions into a single, low cost System-On-Chip (SOC) solution. However, conventional processors, when used in network related applications, are beset by the overhead of save/restore of register context, cache misses due to...
The design of mixed-signal integrated circuits has evolved from simple analog and digital circuits operating on the same silicon substrate to the point that now we have complete system on a chip solutions for communication systems. The levels of integration needed to remain cost effective in today's integrated circuit (IC)...
The general expressions for finding the network functions, e.g.,
the immittance and the scattering parameters, of a general, uniformly
coupled n-line structure in an inhomogeneous medium are derived in
terms of the normal mode parameters of the system. These are used to
compute or to derive the explicit expressions for...
During the last few years we have seen formidable advances in digital and mobile
communication technologies such as cordless and cellular telephones, personal
communication systems, Internet connection expansion, etc. The vast majority
of digital information used in all these applications is stored and also processed
within a computer system, and...
As the information-processing and telecommunications revolutions now underway will continue to change our life styles in the rest of the 21st century, our personal and economic lives rely more and more on our ability to transact over the electronic medium in a secure way. The privacy, authenticity, and integrity of...
Power quality has become an important concern to both electric utilities and
end users due to the increased use of non-linear loads in modem power systems
over the past decade. Nonlinear loads inject harmonics into the power system and
thus may lead to poor power quality and lower power factor....
The objective of the research presented in this thesis is to develop, implement, and demonstrate the utility of an n-sheet, state-space alternating-current thin-film electroluminescent (ACTFEL) device model. In this model, the phosphor layer is discretized into n + 1 layers, with band-to-band impact ionization, space charge creation/ annihilation, and luminescent...
Current superscalar microprocessors' performance depends on its frequency and the
number of useful instructions that can be processed per cycle (IPC). Higher frequency
is achieved with process advancement, new circuit techniques, and microarchitectural
improvement. Number of instructions processed per cycle depends mainly on
microarchitecture techniques that exploit parallelism both spatially...
With increasing operating frequencies in CMOS RF/microwave integrated circuits,
the performance of on-chip interconnects is becoming significantly affected by the lossy
substrate. It is the purpose of the first part of this thesis to develop a rigorous field
theoretic analysis approach for efficient characterization of single and multiple coupled
interconnects...
The application of information theory and digital signal processing techniques to digital
communication has resulted in robust methods for reliable high speed data transmission
over noisy channels environments. Among these methods, multicarrier systems have
become a viable solution for exploiting maximum spectral efficiency over both wideband
highly dispersive static and...
In recent years, the elliptic curve cryptosystems (ECC) have received attention
due to their increased security with smaller key size which brings the advantage of less
storage area and less bandwidth. Elliptic curve cryptography provides a methodology
for obtaining high-speed, efficient, and scalable implementations of network security
protocols. In addition...
Digital systems, in particular microprocessor, have recently experienced phenomena growth in performance. Both technology advancement and clever design have sustained this performance growth. As clock frequency heads into the Ghz range, new circuit design, for both logic and storage, are needed. Such new circuit technology must provide needed performance with...
A new CAD-oriented methodology for the full-wave broadband characterization of coupled microstrip structures for RF/microwave and high-speed digital circuits is presented. The characterization methodology is based on the finite difference time domain (FDTD) technique combined with a systematic extraction procedure using the normal mode approach and multiport network concepts. The...
The widespread use of Wireless Local Area Networks (WLAN) and the desire for such products from different vendors to operate together has generated a movement towards standardization. Over the last decade, several organizations worldwide have researched and developed such standards, this includes the IEEE 802.11 committee. One of the important...
The microprocessors will have more than a billion logic transistors on a single chip in the near future. Several alternatives have been suggested for obtaining highest performance with billion-transistor chips. To achieve the highest performance possible, an on-chip multiprocessor will become one promising alternative to the current superscalar microprocessor. It...
The distortions of input voltage and current waveforms generated by switch mode power supply (SMPS) operation are a major cause of concern in the power quality performance of commercial office buildings. These distortions are usually evaluated by performing a site survey of the building. In this thesis, a power quality...
In the past, multimedia technology focused mainly on designing high quality audio and graphical imagery as well as providing adequate performance levels that the users demand for multimedia applications. However, the concept of multimedia has expanded into New-Media that involves variety use of multimedia data in consumer-oriented applications, such as...
A fully automated method for content-based color image retrieval is developed to extract color and shape content of an image. A color segmentation algorithm based on the k-mean clustering algorithm is used and a saturated distance is proposed to discriminate between two color points in the HSV color space. The...
In this thesis steady-state (i.e. steady-state with respect to the applied voltage waveform) transient current-transient voltage [i(t)-v(t)], transient brightness-transient current [b(t)-i(t)], transient brightness-transient voltage [b(t)-v(t)], transient current [i(t)], transient brightness [b(t)], and detrapped charge analysis are introduced as novel organic light emitting device (OLED) characterization methods. These analysis methods involve...
This paper discusses current network technologies and protocols and presents a simulation study of the most common networking protocol used today, TCP/IP. The TCP/IP protocol stack has many inherent problems that will be shown through this simulation study. Using the SimpleScalar Toolset, the significance of the data copying and checksumming...
Recent developments in digital communications at microwave frequencies have revealed that local oscillator phase noise is often a factor in the bit error rate (BER) analysis. Digital signals transported across microwave radio links acquire waveform jitter from local oscillator phase noise. As jitter increases so does BER.
The main goals...
With the introduction of high speed semiconductor power devices and the
increased application of adjustable speed drives (ASDs) for efficient speed control of ac
motors, there has been a growing number of costly motor-drive related process failures. It
has been found that the high dv/dt and high switching frequency have...
The goal of this thesis is the identification and synthesis of high-luminance,
primary color alternating-current thin-film electroluminescent (ACTFEL) devices.
Special attention is paid to the synthesis of primary color green ACTFEL devices because
of the lack of an adequate primary green ACTFEL phosphor and the dominance
of green wavelengths in...
Continuous process scale-down and emerging markets for low-power/low-voltage mobile systems call for low-voltage analog integrated circuits. Switched-capacitor (SC) circuits are the building blocks for analog signal processing and will encounter severe overdrive problems when operating at low voltage conditions. There exist three techniques to solve the problem, but with their...
The precise measurement of a capacitance difference or ratio in a digital form is
very important for capacitive sensors, for CMOS process characterization as well as for the
realization of precise switched-capacitor data converters, amplifiers and other circuits
utilizing ratioed capacitors. This thesis introduces design techniques for on-chip capacitor
ratio...
The major limiting factor of DRAM access time is the low transconductance of the
MOSFET's which have only limited current drive capability. The bipolar junction
transistor(BJT) has a collector current amplification factor, β, times base current and is
limited mostly by the willingness to supply this base current. This collector...
The awareness of electric power quality has increased over the past decade as electronic equipment
has become more susceptible to power disturbances. The most disruptive power disturbances are voltage
sags and momentary interruptions and their effect on adjustable speed drives (ASDs) is studied in this
thesis.
Several solutions have been...
This dissertation presents the continued study of a
non-iterative decision feedback (DF) receiver/decoder
design and its application to cellular communications or
wireless local loop systems based on the IS-95(-A)
standard of the Telecommunications Industry Association
and also Personal Communications Services systems based on
the American National Standards Institute standard J-STD-...
A method and apparatus are presented for generating suppressed carrier digital clock signals. These clock signals have the advantage of being broad band in nature and thus exhibiting lower power spectral density. Structures or systems utilizing such clock signals would be less likely to create electromagnetic noise of sufficient intensity...
This thesis is a preliminary study of the relative performance of the major speech compression techniques, Differential Pulse Code Modulation (DPCM) and Subband Coding (SBC) in the presence of transmission distortion. The combined effect of the channel distortions and the channel codec including error correction is represented by bursts of...
As the performance gap between processor and memory grows, memory latency will be a major bottleneck in achieving high processor utilization. Multithreading has emerged as one of the most promising and exciting techniques used to tolerate memory latency by exploiting thread-level parallelism. The question however remains as to how effective...
Extensive studies have been undertaken on the transient stability of large interconnected
power systems with flexible ac transmission systems (FACTS) devices installed.
Varieties of control methodologies have been proposed to stabilize the postfault system
which would otherwise eventually lose stability without a proper control. Generally speaking,
regular transient stability is...
Full integration of CMOS low noise amplifiers (LNA) presents a challenge for low
cost CMOS receiver systems. A critical problem faced in the design of an RF CMOS LNA
is the inaccurate high-frequency noise model of the MOSFET implemented in circuit
simulators such as SPICE. Silicon-based monolithic inductors are another...
This thesis describes compensation techniques for cascaded delta-sigma A/D
converters (ADCs) and high-performance switched-capacitor (SC) circuits. Various
correlated-double-sampling (CDS) techniques are presented to reduce the effects of the
nonidealities, such as clock feedthrough, charge injection, opamp input-referred noise and
offset, and finite opamp gain, in SC circuits. A CDS technique...
In recent years, there has been an extensive effort to develop low-cost implementations
of radio frequency integrated circuits for consumer applications. This thesis is a
research effort in the design and implementation of integrated RF CMOS Power Amplifiers
(PAs). A significant challenge in the implementation of RF CMOS ICs is...
Computer and network security has recently become a popular subject due to the explosive growth of the Internet and the migration of commerce practices to the electronic medium. Thus the authenticity and privacy of the information transmitted and the data stored on networked computers is of utmost importance. The deployment...
Advancements in the sophistication and complexity of modern electronic systems are creating a need for highly integrated systems with ever higher operational frequencies. The economical demands of these systems dictate that they be implemented using low cost fabrication technologies, such as digital CMOS. One of the major challenges facing circuit...
As the design of computers advances, two important trends have surfaced: The exploitation of parallelism and the design against memory latency. Into these two new trends has come the Multithreaded Virtual Processor (MVP). Based on a standard superscalar core, the MVP is able to exploit both Instruction Level Parallelism (ILP)...
A versatile computational technique for improved time domain modeling of electromagnetic radiative systems is demonstrated. Two computational methods are combined: the finite-difference time domain (FDTD) method, a full-wave electromagnetic field solver, and the Kirchhoff surface integral formulation, a spatial transformation technique. The combined FDTD/Kirchhoff technique is shown to increase accuracy...
Reliable controller designs have been developed in this thesis for a number of finite-horizon
and infinite-horizon problems with possibly non-zero initial conditions. These
reliable controllers assure that system stability and system performance will be
maintained despite certain system faults. The performance measure used in this thesis is
an "H[subscript ∞]-like...
The advent of low-cost RFIC's fabricated in Silicon-based technologies has led to the use of monolithic lumped elements which are located on-die. While it is clearly advantageous to have a high degree of integration and thus fewer off chip elements, parasitic losses due to semiconducting substrate effects can be a...
In this thesis, novel design techniques have been proposed for implementing high-linearity SC circuits in a standard digital CMOS process. They use nonlinear MOSFET capacitors instead of linear double-poly capacitors. To reduce their nonlinearities, a bias voltage is applied to keep MOSFET capacitors in their accumulation regions. For further reduction...
Minimizing the dynamic power consumption of a circuit is becoming a more and more important issue for digital circuit design in the age of portable electronics. Among all the arithmetic circuits, addition is the most fundamental operation. Therefore, designing low power adder is an important and necessary research area.
In...
A comparison of two novel demodulators. The first is a basic zero crossing demodulator,
as introduced by Beards. The second is an approach proposed by Hovin. The two demodulators
are compared to each other and to the conventional method of demodulation.
An AC/AC converter has been designed and implemented for the purpose of
providing a modular drive system with a Brushless Doubly-Fed Machine (BDFM.) This
converter is to be used in laboratory testing and also as part of a demonstration system in
the field.
All hardware needed to start and run...
The multimedia capabilities of computers have recently become the focus of computer developers due to the increasing demand for advanced computer graphics and new media capabilities, such as video conferencing, 3-D visualization, and animation. To support these multimedia capabilities, specialized graphics hardware, such as MPEG encoding/decoding card, 3-D graphics card,...
Three block ciphers are considered to determine how well they can be
implemented on existing superscalar architectures such as the Intel Pentium.
An examination of the Pentium architecture suggests that substantial
performance increases can be achieved if particular rules are followed.
Software libraries are written in high-level C language and...
An extremely important area that has enabled or will enable many of the
digital video services and applications such as VideoCD, DVD, DVC, HDTV, video
conferencing, and DSS is digital video compression. The great success of digital video
compression is mainly because of two factors. The state of the art...
Until now the topic of motion estimation, as used in video compression, has been dominated by search methodologies which are modifications of an exhaustive search. This research takes a completely new approach by applying two evolvable search algorithms, the Genetic Algorithm and the Genetic Program, to the area of motion...
As Si MOS approaches its maximum limits in speed and bandwidth, new
devices are desired to meet the needs of high speed communications and signal
processing. A device that exhibits superior performance to Si MOS, BJT, and
GaAs technology is the HEMT (high electron mobility transistor).
The HEMT offers superior...
The counterflow pipeline concept was originated by Sproull and Sutherland to demonstrate
the concept of asynchronous circuits. This architecture relies on distributed decision
making and localized clocking and data movement. We have taken these ideas and reformulated
them into a substantially faster more scalable architecture that has the same distributed...
Sorting is one of the more computationally intensive tasks a computer performs. One of the most effective ways to speed up the task of sorting is by using parallel algorithms. When implementing a parallel algorithm, the designer has to make several decisions. Among the decisions are the algorithm and the...
An active-matrix electroluminescent (AMEL) design tool has been developed for
the simulation of AMEL display devices. The AMEL design tool is a software package
that simulates AMEL device operation using a lumped parameter circuit model. The
lumped parameter circuit model is developed primarily to address AMEL power
dissipation issues. The...
Basic operation, as well as successful development, of the Brush less Doubly-fed Machine (BDFM) has been documented, and research has turned from proof of concept and early development to the more practical direction of increased manufacturability to prove industrial viability. Previous research centered on using standard induction motor stators along...
Adaptive filtering may be applied in areas where an optimal filtering algorithm
may not be known a-priori and where the filtering operation may be non-stationary. This
field, or more generally, the field of adaptive systems, is one which may be regarded as
mature, having been the subject of considerable research...
Since its introduction in the early 1990s, the quick growth of the World Wide Web
(WWW) traffic raises the question of whether past Local Area Network (LAN) packet
traces still reflect the current situation or whether they have become obsolete. For this
thesis, several LAN packet traces were obtained by...
Computer and network security systems rely on the privacy and authenticity of information, which requires implementation of cryptographic functions. Software implementations of these functions are often desired because of their flexibility and cost effectiveness. In this study, we concentrate on developing high-speed and area-efficient modular multiplication and exponentiation algorithms for...